Mashiinka Jarida Xaashida Laba-jibbaaran ee DHS-1400/1500/1700/1900
Faahfaahinta
| MOODEL | DHS-1400 | DHS-1500 | DHS-1700 | DHS-1900 |
| Nooca jarista | Mindiyo laba-laaban oo wareeg ah; oo leh 6 qaybood oo ah nidaam goyn otomaatig ah oo servo toosan oo toosan (sidoo kale waxay leeyihiin mindi goyn oo neef-mareen ah) | Mindiyo laba-laaban oo wareeg ah; oo leh 6 qaybood oo ah nidaam goyn otomaatig ah oo servo toosan oo toosan (sidoo kale waxay leeyihiin mindi goyn oo neef-mareen ah) | Mindiyo laba-laaban oo wareeg ah; oo leh 6 qaybood oo ah nidaam goyn otomaatig ah oo servo toosan oo toosan (sidoo kale waxay leeyihiin mindi goyn oo neef-mareen ah) | Mindiyo laba-laaban oo wareeg ah; oo leh 6 qaybood oo ah nidaam goyn otomaatig ah oo servo toosan oo toosan (sidoo kale waxay leeyihiin mindi goyn oo neef-mareen ah) |
| Tirada jarista duubabka | 2 duub | 2 duub | 2 duub | 2 duub |
| Dhinaca bixitaanka | 2-dhinac | 2-dhinac | 2-dhinac | 2-dhinac |
| Miisaanka warqadda | 80 * 2-1000GSM | 80 * 2-1000GSM | 80 * 2-1000GSM | 80 * 2-1000GSM |
| Dhexroorka ugu badan ee giraangiraha | 1800mm(71") | 1800mm(71") | 1800mm(71") | 1800mm(71") |
| Ballaca ugu badan ee la dhammeeyay | 1400mm (55") | 1500mm (59") | 1700mm(67") | 1900mm (75") |
| Dhererka xaashida dhammaatay | 450-1650 mm | 450-1650 mm | 450-1650 mm | 450-1650 mm |
| Xawaaraha ugu badan ee jarista | 300 mitir/daqiiqad | 300 mitir/daqiiqad | 300 mitir/daqiiqad | 300 mitir/daqiiqad |
| Xawaaraha ugu badan ee jarista | 450 jeer/daqiiqaddii | 450 jeer/daqiiqaddii | 450 jeer/daqiiqaddii | 450 jeer/daqiiqaddii |
| Saxnaanta jarista | ±0.25mm | ±0.25mm | ±0.25mm | ±0.25mm |
| Dhererka rarka keenista | 1600mm (oo ay ku jiraan baakadda) | 1600mm (oo ay ku jiraan baakadda) | 1600mm (oo ay ku jiraan baakadda) | 1600mm (oo ay ku jiraan baakadda) |
| Awoodda ugu weyn ee matoorka | 63KW | 63kw | 63kw | 63kw |
| Awood guud | 95KW | 95 kw | 95KW | 95KW |
| Shuruudaha isha hawada | 0.8Mpa | 0.8Mpa | 0.8Mpa | 0.8Mpa |
| Danab | 380v; 50hz | 380v; 50hz | 380v; 50hz | 380v; 50hz |
Faa'iidooyinka:
● Mashiinkayaga jarista giraanta wuxuu qaataa tiknoolajiyada casriga ah ee ka timid Taiwan iyo Jarmalka, wuxuuna la mid yahay khibradda aan u leenahay in ka badan labaatan sano oo aan ku soo saarnay mashiinka jarista giraanta.
● Mashiinkani wuxuu qaataa matoorka servo iyo daabyo labanlaab ah si loo jaro sida maqas oo kale oo leh xawaare sare iyo saxnaan sare, taas oo aad uga duwan habka jarista dhaqameed.
● Waxay qaadataa daabyo Jarmal ah oo laga soo dhoofiyo dalka si ay si wax ku ool ah u yareeyaan culeyska jarista iyo buuqa una dheereeyaan cimriga adeegga mindiyaha. Gaarsii hagaajinta dheelitirka si loo yareeyo gariirka mashiinka marka uu ku shaqeynayo xawaare sare.
● Qalabka Jarmalka ee saxnaanta sare leh iyo qalabka dib-u-celinta oo la hagaajiyay, buuq yar oo mesh ah, waqtiga isticmaalka ayaa laba jibaar ka dheer naqshadda dhaqameed.
● Mindi jeexitaan oo pneumatic ah, jarista bartamaha, gees goynta nadiifka ah, gubasho la'aan iyo soo saarista boodhka, ayaa si toos ah loogu dhejin karaa mashiinka daabacaadda.
● Xawaaraha jarista warqadda waxaa loo qaybiyaa qaybo degdeg ah iyo qaybo gaabis ah si loo muujiyo saameynta kala soocidda, tirinta iyo is dulsaarka. Waxay ku fiican tahay ilaalinta dusha sare ee warqadda wixii xoqan iyo iyada oo aan lahayn wax dhibco iftiin ah.
● Nidaamka xakamaynta korontada oo leh cutub kaydin tamar ayaa badbaadiya 30% isticmaalka korontada.
Faahfaahinta Mashiinka
A.Istaagid giraangireed
1. Gacanta xoqidda warqadda asalka ah waxay ka samaysan tahay bir la shubay oo leh hab gaar ah oo shubid ah, xoog sare leh oo aan waligood isbeddelin, taas oo hubinaysa badbaadada gacanta xoqidda warqadda asalka ah.
2. Qaab-dhismeedka rarista warqadaha aan lahayn shaft-haydarooliga ayaa isku mar ku shuban kara 2 duub oo warqad ah.
3. Xididka usha 3″6″12″ oo ah qalab ballaarin farsamo, dhexroorka ugu badan ee wareegga φ1800mm.
4. Waxay si toos ah u xakamayn kartaa cabbirka xiisadda warqadda marka ay warqadda ku jarayso xawaare sare.
5. Warqadda Haydarooliga φ120*L400MM, dhululubada Haydarooliga φ80*L600MM waxay qabsataa warqadda waxayna u dhaqaaqdaa bidix iyo midig.
6. Warqad dhulka hoostiisa ah oo wadata gaadhi xamuul ah, tareenka hagaha ee nooca I-type.
7. Dhererka gaariga lagu riixo waa 1M.
8. Culayska ugu badan ee taayirada ee ka gudba hagaha: 3 tan.
9. Sixitaanka saxda ah iyo meelaynta duubabka warqadda ee gaariga xamuulka qaada waxaa sameeya macmiilka.
10. Qalabka Qabsashada ee la xoojiyay ee loogu talagalay warshadda warqadda oo 2.5 tan ah
B.Cutubka Toosinta Warqadda ee Ka-hortagga Qallooca ee Laba-geesoodka ah
1. Sixitaan cusub oo warqad laba-geesood ah oo toosan, warqad qaro weyn oo khafiif ah oo laba-geesood ah,
2. Ka saarista wax ku oolka ah ee warqad dahaarka leh oo miisaankeedu sarreeyo, budo la'aan, si warqaddu u noqoto mid siman, oo aan lahayn qallooc.
3. Warqad xakameyn otomaatig ah, bir yar oo bir ah oo ay taageerto buufin, dusha sare ee chrome-plated.
C.Roodh Cagaaran oo Ka-hortagga Warqadda-Jabiska
1. leexashada duubista caagga ah: leexashadu waxay ku qalabaysan tahay ulaha waaweyn iyo kuwa yaryar ee caadiga ah, ulaha waaweyn iyo kuwa yaryarna si dhakhso ah ayaa loo beddeli karaa si loo daboolo shuruudaha kala duwan ee leexashada.
2. Qalabka leexashada ee pneumatic-ka, kaas oo bixiya saameyn nasasho oo wanaagsan oo loogu talagalay warqadda dhalaalaysa.
3. Dhexroorka usha weyn 25mm, dhexroorka usha yar 20mm
D.Qaybta quudinta
1. Waxaa lagu sameeyay bir bir ah, duubka godka ah waxaa si sax ah loogu farsameeyay φ260MM, si firfircoon ayaa loo dheellitiray, dusha sare waxaa lagu dahaadhay ciid, waxaana lagu daweeyay chrome-ga adag.
2. Roogga Daran: Dusha sare ee rooggu waxay ka kooban tahay cinjir gudaha ah oo la soo dhoofiyay, naqshad jeexdin ah oo 3. ballaaran, iyo xakamaynta neef-mareenka ee loogu talagalay xoqidda warqadda cadaadiska.
Daboolka Badbaadada: Daboolka badbaadada ayaa si toos ah u joojiya mashiinka marka la furo, taasoo hubinaysa badbaadada.
4. Qayb jeexitaan ah
Mashiinka saxda ah ee qaybaha birta ah ee alwaaxa, oo lagu qalabeeyay hagayaal toosan. Daabyada sare waa kuwo hawo-mareen ah, daabyada hoosena waa kuwo bir ah oo tungsten ah, taasoo hubinaysa in geesaha jarista ay siman yihiin oo aan burr lahayn. Haystaha mindiyaha ee adkaysiga badan leh wuxuu ku habboon yahay jarista xawaaraha ilaa 400 mitir daqiiqaddii.
IKHTIYAARI AH:
※ Faa'iidooyinka Matoorka Birlabta ee Isku-xidhka IC:
1. Dayactirka Eber, saxnaan sare, iyo xawaaraha.
2. Xawaaraha oo yaraada iyo buuqa oo yaraada.
3. Gudbinta korontada iyada oo aan lahayn qaybo farsamo sida isku xidhka iyo suunka ilkaha.
4. Looma baahna geerka, boolal, ama saliidayn, taasoo keenta isku hallayn sare.
5. Xalalka wadista ee siman oo is haysta.
6. Naqshadeyn mashiinka oo fudud oo aad u kooban.
7. Marka la barbar dhigo boolal kubbadda, raafka, iyo dhaqaajiyayaasha geerka, baaxadda ballaaran iyo jawaab degdeg ah.
8. Hoos u dhig buuqa, qaybaha oo yar, iyo kharashyada guud ee hawlgalka oo yar.
5. Qayb jarid ah
1. Waxaan isticmaalnaa naqshad daab oo gaar ah oo ku dhex jirta qaab-dhismeed gaar ah, taasoo hubinaysa in qaybo isku mid ah loo sameeyo qaybo badan oo la jaray, oo aan lahayn warqado aan caddayn. Waa doorashada ugu fiican ee warshadaha jarista duubka ee heerka sare ah.
2. Rulabyada mindiyaha ee sare iyo hoose: Marka la qaato habka jarista Jarmalka, waxaan si wax ku ool ah u yareyneynaa culeyska iyo buuqa inta lagu jiro jarista warqadda. Rulabyada mindiyaha waxaa laga sameeyay bir bir ah oo godan, oo leh dhexroor sax ah oo ah φ210MM, waxaana la mariyaa habayn taxaddar leh iyo hagaajin dheelitirnaan firfircoon. Tani waxay si weyn u xoojisaa xawaaraha socodka, waxay yareysaa gariirka iyo buuqa inta lagu jiro hawlgalka xawaaraha sare, waxayna yareysaa boodhka warqadda.
3. Daabyada jarista: Iyada oo lagu sameeyay saxnaan laga sameeyay bir bir adag oo gaar ah, daabyadani waxay leeyihiin cimri dherer aad u dheer, iyagoo 3-5 jeer ka badan kuwa dhaqameed. Cidhifyada daabyada si fudud ayaa loo hagaajin karaa, taasoo sahlaysa hagaajinta saxda ah.
6. Qalabka raritaanka warqadda ah oo leh qashin ka saarista
1. Nooca: Kala duwanaanshaha toosan ee marxaladaha badan leh si loo soo saaro tirinta kala soocida iyo saameynta is dulsaarka warqadda.
2. Qaybta ugu horreysa ee gudbinta: nuugista nuugista si dhakhso ah loo kala saaro loona jaro warqadda, qalabka si degdeg ah loogu shubo qashinka.
3. Qaybta labaad ee gudbinta: gudbinta dabada oo aan cadaadis lahayn oo aan lahayn cadaadis waxay noqon kartaa hal ficil ama xakamayn ficil oo joogto ah, hagaaji warqadda loo dirayo qaab taayir ah.
4. Qaybta keenista warqadda: Kala-sooc warqadeed oo la safeeyey, kaas oo la hagaajin karo iyadoo lala kaashanayo ballaca warqadda.
5. Giraangiraha quudinta cadaadiska ayaa kordhin kara xasilloonida warqadda oo ka fogaan kara isbeddelka warqadda.
7. Is-dhexgalka mashiinka-Man
Qaybta Xakamaynta Korontada: Waxay ku jirtaa nidaamka xakamaynta darawalka servo ee Taiwan PLC iyo INVT si loo wanaajiyo ku habboonaanta iyo otomaatiga. Dhererka jarista, tirada badeecada la dhammeeyay, tirada guud, iwm., waxaa si toos ah loogu gelin karaa shaashadda taabashada. Muujinta waqtiga-dhabta ah ee dhererka jarista dhabta ah iyo tirada ayaa la heli karaa. INVTservo waxay wadataa usha mindi ee wareegaysa, iyadoo lala kaashanayo cutub kaydinta tamarta, iyadoo si wax ku ool ah loo dhimayo isticmaalka korontada, hagaajinta hufnaanta, iyo yareynta kharashyada wax soo saarka.
8. Qalabka Siman ee Waraaqaha iyo Kala-soocidda
1. Nooca: Miiska ururinta waraaqaha ee kor u qaadista farsamada, kaas oo si toos ah hoos ugu soo dhaca marka warqadda la dhigo meel gaar ah.
2. Dhererka ugu badan ee wax ku oolka ah ee warqaddu waa 1500mm (59 ")
3. Cabbirka warqadda: W = 1900mm
4. Qalabka hagaajinta warqadda: farsamada hagaajinta warqadda hore ee korontada.
5. Habka hagaajinta warqadda gacanta ee labada dhinac
6. Habka albaabka dambe ee la hagaajin karo
9. Mashiinka calaamadaynta otomaatiga ah (qalabka gelinta tabka) labada dhinacba
Iyadoo la tirinayo sax ah ka dib calaamadaynta gelinta, hawl-wadeennadu waxay u baahan yihiin oo keliya inay geliyaan isku-xirka mashiinka-man-ka si ay u dhammaystiraan tirada warqadda, waxayna la jaanqaadi karaan dejimaha lagu calaamadeynayo tirada warqadda. Hal qalab oo gaar ah ayaa tab warqad ah ku soo daraya baakadda la dhigayo. Tirada xaashida u dhaxaysa hal tab iyo mid kale waxaa horay u dejiyay hawl-wadeenka. Xidhmooyinka tabku waa jihada warqadda ee baakadaha. PLC waxay saameyn doontaa tirinta xaashida marka tirada hore loo dejiyay la gaaro tab ayaa la gelin doonaa inta u dhaxaysa xaashida baakadda la dhigayo. Geliyaha tab-ka waxaa si toos ah uga hor imanaya PLC ama waxaa gacanta ku hayn kara laba fure, mid kaas oo quudiya xariiqda warqadda kan kalena jarista xariiqda.
10. Qalabka gelinta cajaladda
Waxay leedahay shaqada tirinta saxda ah oo ay ku xigto calaamadaynta. Hawlwadeenku wuxuu u baahan yahay oo keliya inuu geliyo tirada xaashida lagu calaamadeeyay is-dhexgalka mashiinka-aadanaha, ka dibna tirada xaashida calaamadaysan ayaa loo dejin karaa iyadoo loo eegayo dejimaha. Qalab gaar ah ayaa ah in lagu geliyo calaamad warqad saxaaradda. Hal calaamad ayaa la dhigayaa inta u dhaxaysa tirada xaashida, kan kalena waa hawlwadeenka hore loo dejiyay. Tabku wuxuu geliyaa jihada xaashida saxaaradda, PLC-na waxay saameyn doontaa tirinta xaashida. Marka la gaaro lambarka hore loo dejiyay, calaamad ayaa lagu gelinayaa saxaaradda. Qalabka calaamadaynta waxaa si toos ah ama gacan ahaan loogu xakameynayaa laba fure, mid loogu talagalay quudinta cajaladda warqadda iyo kan kalena loogu talagalay jarista xariijimaha.
Nidaamka Matoorka Darawalka
| Mindi wareegsan oo AC servo matoor ah 90KW | 1 SET |
| Darawalka matoorka servo ee ugu weyn63KW | 1 SET |
| Quudinta warqadda ah ee matoorka adeegga AC 15KW | 1 SET |
| Qaybta koowaad ee matoorka servo-ga xawaaraha sare leh ee gudbinta isku-xidhka ah 4KW | 1 SET |
| Suun gudbiye labaad oo leh matoor hoos u dhac soo noqnoqosho oo isbeddela 2.2KW | 1 SET |
| Matoorka hoos u dhigista heerka warqadda hore 0.75KW | 1 SET |
| Dhimista silsiladda matoorka ee loogu talagalay matoorka miiska kor u qaadista kartoonka 3.7KW | 1 SET |