Injin Yanke Mutuwa ta atomatik na HMC-1080 Hotunan da aka Fito

Injin yanke-yanke na HMC-1080 ta atomatik

Takaitaccen Bayani:

Injin yankewa na HMC-1080 na atomatik kayan aiki ne mai kyau don sarrafa akwati da kwali. Amfaninsa: saurin samarwa mai yawa, daidaito mai yawa, matsin lamba mai yawa na yankewa. Injin yana da sauƙin aiki; ƙarancin abubuwan amfani, aiki mai karko tare da ingantaccen samarwa. Matsayin ma'aunin gaba, matsin lamba da girman takarda yana da tsarin daidaitawa ta atomatik.

Siffa: akwai don yankan kwali ko samfurin allon corrugated wanda ke da saman bugu mai launi.

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

NUNA KAYAYYAKI

BAYANI

HMC-1080
Girman Takarda Mafi Girma (mm)		1080(W) × 780(L)
Girman Takarda Mafi Karanci (mm)		400(W) × 360(L)
Matsakaicin Girman Yankewa na Mutu (mm)		1070(W) × 770(L)
Kauri Takarda (mm)		0.1-1.5 (kwali), ≤4 (allon da aka yi da corrugated)
Matsakaicin gudu (inji/awa)		7500
Daidaicin Yanke Mutu (mm)		±0.1
Kewayon Matsi (mm)		2
Matsakaicin Matsi (tan)		300
Ƙarfi (kw)		16
Tsawon Tarin Takarda (mm)		1600
Nauyi (kg)		14000
Girman (mm)		6000(L) × 2300(W) × 2450(H)
Ƙimar		380V, 50Hz, Waya mai matakai 3, 4

BAYANI

1. Mai ciyarwa

Tare da fasahar Turai, wannan mai ciyarwa yana samuwa don jigilar kwali da takarda mai laushi. Mai kwanciyar hankali da daidaito!

Injin Yankewa Mai Sauƙi Na Atomatik Samfurin HMC-10802

Injin Yankewa Mai Sauƙi Na Atomatik Samfurin HMC-10803

2. Tayar Matsa Mai Kyau

Zai iya daidaita kansa bisa ga girman samfura daban-daban ba tare da goge takarda ba!

3. Tsarin Kulawa Mai Shirye-shirye na PLC

Tsarin wutar lantarki yana amfani da tsarin sarrafa PLC wanda za a iya tsara shi, yana yin ciyar da takarda, jigilar kaya sannan yankewa tare da cikakken sarrafawa da gwaji ta atomatik. Kuma yana da nau'ikan makullin tsaro iri-iri waɗanda za a iya kashewa ta atomatik idan wani yanayi na bazata ya faru.

Injin Yankewa Mai Sauƙi Na Atomatik Samfurin HMC-10804

Injin Yankewa Mai Sauƙi Na Atomatik Samfurin HMC-10805

4. Tsarin Direba

Babban tsarin direban yana amfani da tsarin ƙafafun tsutsa, gear ɗin tsutsa da tsarin crankshaft, don tabbatar da cewa injin yana aiki daidai kuma tare da daidaito mai kyau. Kayan da ke cikin ƙafafun tsutsa an yi su ne da ƙarfe na musamman.

5. Salon Sufuri na Matsi na Belt

Fasaha ta musamman ta jigilar matsi ta bel, za ta iya guje wa lanƙwasa zagayen takarda na karo, da kuma cimma cikakken matsin lamba na nau'in ciyar da takarda a gaba ta hanyar gargajiya.