QYF-110/120 Full-auto Pre-ukwaleka Film Laminator

Inkcazelo emfutshane:

I-QYF-110/120 Umatshini wokuLayitisa ongenaGlue opheleleyo we-Auto-auto yenzelwe i-lamination yefilimu efakwe ngaphambili okanye ifilimu engenaglu kunye nephepha.Umatshini uvumela ulawulo oludibeneyo phezu kokutya kwephepha, ukususwa kothuli, i-lamination, i-slitting, ukuqokelela iphepha kunye nobushushu.

Inkqubo yayo yombane inokulawulwa yi-PLC kwiindlela ezisembindini ngokusebenzisa isikrini sokuchukumisa.Ukubonakaliswa kwinqanaba eliphezulu lokuzenzekelayo, ukusebenza lula kunye nesantya esiphezulu, uxinzelelo kunye nokuchaneka, umatshini uyimveliso yomgangatho ophezulu wokusebenza-kwixabiso okhethwa ngamashishini amakhulu kunye naphakathi.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

UMBONISO WEMVELISO

INGCACISO

QYF-110
Max.Ubungakanani bephepha(mm)	1080(W) x 960(L)
Min.Ubungakanani bephepha(mm)	400(W) x 330(L)
Ukutyeba kwePhepha(g/㎡)	128-450 (iphepha elingezantsi kwe-128g/㎡ lifuna ukusika ngesandla)
Iglu	Akukho glu
Isantya soomatshini(m/min)	10-100
Ummiselo oLalelanayo(mm)	5-60
Ifilimu	BOPP/PET/METPET
Amandla(kw)	30
Ubunzima(kg)	5500
Ubungakanani(mm)	12400(L)x2200(W)x2180(H)

QYF-120
Max.Ubungakanani bephepha(mm)	1180(W) x 960(L)
Min.Ubungakanani bephepha(mm)	400(W) x 330(L)
Ukutyeba kwePhepha(g/㎡)	128-450 (iphepha elingezantsi kwe-128g/㎡ lifuna ukusika ngesandla)
Iglu	Akukho glu
Isantya soomatshini(m/min)	10-100
Ummiselo oLalelanayo(mm)	5-60
Ifilimu	BOPP/PET/METPET
Amandla(kw)	30
Ubunzima(kg)	6000
Ubungakanani(mm)	12400(L)x2330(W)x2180(H)

IINKCUKACHA

1. I-Automatic Paper Feeder

Uyilo oluchanekileyo lwe-feeder luvumela ukutya okugudileyo kwephepha elicekethekileyo nelingqindilili.Ukusetyenziswa kwesixhobo sokutshintsha isantya esingena-stepless kunye nolawulo oluzenzekelayo lwe-lapping lufanelekile kwisondlo samacandelo ahlukeneyo ephepha.Ukufunyanwa kwephepha elingaphazamisekiyo kwitafile encedisayo kuphucula ukusebenza kakuhle komatshini.

I-auto-auto epheleleyo yangaphambili yokugquma iFilimu yeLaminator Model QYF-110-120-1

Full-auto Pre-ukwaleka Film Laminator Model QYF-110-120-2

2. Inkqubo yeHMI

Iscreen sombala esingu-7.5” kulula ukusisebenza.Ngokusebenzisa isikrini sokuchukumisa umqhubi unokuphonononga iimeko zokusebenza zomatshini kwaye angene ngokuthe ngqo kwimilinganiselo kunye nomgama ogqithisayo wephepha eliza kucutshungulwa ukufezekisa ukuzenzekelayo kokusebenza komatshini opheleleyo.

3. Isixhobo sokususa uthuli (ukhetho)

Indlela yokususa uthuli ngamanyathelo amabini, oko kukuthi, ukutshayela uthuli nokucinezela, iyasetyenziswa.Ngelixa iphepha lisebhantini lokuhambisa, uthuli olukumphezulu walo lukhukuliswa yibrashi yeenwele kunye nomqolo webrashi, isuswe yifeni yokufunxa kwaye iqhutywe ngumqulu wokucinezela wombane.Ngale ndlela uthuli olufakwa ephepheni ekushicileleni lususwa ngempumelelo.Ngaphezu koko, iphepha linokuthuthwa ngokuchanekileyo ngaphandle kokubuyela umva okanye ukuchithwa kusetyenziswa ilungiselelo elihlangeneyo kunye noyilo lwebhanti yokuhambisa ngokudibanisa nokufunxa umoya osebenzayo.

Full-auto Pre-ukwaleka Film Laminator Model QYF-110-120-3

4. Cinezela-fit iCandelo

Umqulu wokufudumeza we-mainframe ufakwe kwinkqubo yokufudumala yeoli yangaphandle kunye neqondo lokushisa elilawulwa ngumlawuli wokushisa ozimeleyo ukuze kuqinisekiswe ubushushu obufanayo kunye nobushushu obuhlala buhleli kunye nomgangatho olungileyo we-laminating.Uyilo lwe-laminating rolls oversized oversized: I-oversized heat and press-fit rubber roll iqinisekisa i-press-fit-fit, iphucula ukukhanya kunye nenkqubo yokulahla ngokugqibeleleyo.

Full-auto Pre-ukwaleka Film Laminator Model QYF-110-120-5

5. I-Film Unreeling Shaft

I-Braking nge-powder magnetic igcina uxinzelelo oluqhubekayo.Ifilimu ye-pneumatic i-shaft engabonakaliyo kunye nesixhobo sokulayisha sombane sivumela ukulayishwa lula kunye nokukhulula umqulu wefilimu kunye nokubeka ifilimu echanekileyo yokumisa.

6. Isixhobo sokuSlitha ngokuzenzekela

Intloko yerotary cutter isika iphepha elaminethiweyo.Inkqubo esebenzayo edibeneyo yeyunithi inokulungelelanisa isantya sayo ngokuzenzekelayo ngokuxhomekeke kwisantya se-mainframe.Kulula ukusebenza kwaye kusindisa abasebenzi.Ukujija ngokuzenzekelayo kunokukhethwa kwiphepha elifuna ukunqunyulwa ngokuthe ngqo.

Full-auto Pre-ukwaleka Film Laminator Model QYF-110-120-4

Full-auto Pre-ukwaleka Film Laminator Model QYF-110-120-7

7. Ukuqokelelwa kwePhepha oluzenzekelayo (ukhetho)

Isixhobo sokucutha esisemacaleni amathathu sepneumatic esinekhawunta yephepha sinokusebenza ngendlela engaphazanyiswa.Ngomsebenzi ongaphazamisekiyo, tyhala i-lever kwindawo yokulungisa, yehlisa itheyibhile yokuqokelela amaphepha, khupha iphepha usebenzisa inqwelo eqhutywa ngamanzi, tshintsha ipleyiti yesitaki esitsha emva koko ukhuphe i-push lever.

8. IPLC yeNgeniso eNgeniswa kwamanye amazwe

I-PLC yokwenyani engenisiweyo isetyenziselwa ulawulo lwenkqubo yesekethe kunye nolawulo oludibeneyo lwe-electromechanical lomatshini wonke.Imilinganiselo yokurhabula inokulungiswa ngokuzenzekelayo ngesikrini sokuchukumisa ngaphandle kokusebenza ngesandla ukunciphisa ukutenxa kwephepha.I-HMI ibonisa isantya, iimeko zokusebenza kunye neempazamo ngenjongo yokusebenziseka kakuhle komsebenzisi.