HBF-145/170/220 Laminator-ka Flute-ka ee Xawaaraha Sare ee Buundada oo Dhan-ku-jira Sawirka Lagu Soo Bandhigay

HBF-145/170/220 Laminator Buundada Xawaaraha Sare ee Dhammaystiran ee Hal-ku-jira oo Buundada ah oo Buundada ah oo Buundada ah oo Buundada ah oo Buuxa

Sharaxaad Gaaban:

Moodeelka HBF Full-auto High Speed All-in-One Flute Laminator waa mashiinkeena caqliga badan ee caanka ah, kaas oo ururiya quudinta xawaaraha sare, dhejinta, dahaarka, riixista, rogrogista iyo keenista otomaatiga ah. Laminator-ku wuxuu adeegsadaa xakamaynta dhaqdhaqaaqa ee caalamiga ah ee hormuudka ka ah taliska. Xawaaraha ugu sarreeya ee mashiinka wuxuu gaari karaa 160m/daqiiqadii, kaas oo ujeedadiisu tahay buuxinta shuruudaha macaamiisha ee keenista degdega ah, hufnaanta wax soo saarka sare iyo kharashka shaqada oo hooseeya.

Qalabka wax lagu shubo wuxuu alaabta la dhammeeyay u qaybiyaa tuulmo iyadoo loo eegayo tirada la dejiyay. Ilaa hadda, waxay ka caawisay shirkado badan oo daabacan iyo baakado inay wax ka qabtaan dhibaatada shaqo la'aanta, inay hagaajiyaan xaaladda shaqada, inay badbaadiyaan shaqada oo aad u badan iyo inay si weyn u kordhiyaan wax soo saarka guud.

Noo soo dir emayl

Faahfaahinta Badeecada

Calaamadaha Alaabta

BANDHIGGA SOO SAARKA

QEEXIDDA

HBF-145
Cabbirka ugu badan ee xaashida (mm)	1450 (W) x 1300 (L) / 1450 (W) x 1450 (L)
Cabbirka ugu yar ee xaashida (mm)	360 x 380
Dhumucda xaashida sare (g/㎡)	128 - 450
Dhumucda xaashida hoose (mm)	0.5 - 10 (marka kartoonka laminate-ka loo rogo kartoonka, waxaan u baahanahay in xaashida hoose ay ka sarreyso 250gsm)
Xaashida hoose ee ku habboon	Loox jiingado leh (A/B/C/D/E/F/N-flute, 3-laad, 4-laad, 5-laad iyo 7-laad); loox cawlan; kartoon; loox KT, ama warqad ilaa warqad dahaadh ah
Xawaaraha ugu badan ee shaqada (m/daqiiqo)	160m/daqiiqo (marka dhererka biibiilaha uu yahay 500mm, mashiinku wuxuu gaari karaa xawaaraha ugu badan 16000pcs/saacaddii)
Saxnaanta laambadda (mm)	±0.5 - ±1.0
Awood (kw)	16.6 (kuma jiraan kombaresarada hawada)
Awoodda Stacker (kw)	7.5 (kuma jiraan kombaresarada hawada)
Miisaanka (kg)	12300
Cabbirka mashiinka (mm)	21500(L) x 3000(B) x 3000(H)

HBF-170
Cabbirka ugu badan ee xaashida (mm)	1700 (W) x 1650 (L) / 1700 (W) x 1450 (L)
Cabbirka ugu yar ee xaashida (mm)	360 x 380
Dhumucda xaashida sare (g/㎡)	128 - 450
Dhumucda xaashida hoose (mm)	0.5-10mm (kaartoon ilaa kartoon la dahaadhay: 250+gsm)
Xaashida hoose ee ku habboon	Loox jiingado leh (A/B/C/D/E/F/N-flute, 3-laad, 4-laad, 5-laad iyo 7-laad); loox cawlan; kartoon; loox KT, ama warqad ilaa warqad dahaadh ah
Xawaaraha ugu badan ee shaqada (m/daqiiqo)	160 m/daqiiqo (marka la shaqeynayo warqad cabbirkeedu yahay 500mm, mashiinku wuxuu gaari karaa xawaaraha ugu badan 16000pcs/saacaddii)
Saxnaanta laambadda (mm)	±0.5mm ilaa ±1.0mm
Awood (kw)	23.57
Awoodda Stacker (kw)	9
Miisaanka (kg)	14300
Cabbirka mashiinka (mm)	23600 (L) x 3320 (B) x 3000 (H)

HBF-220
Cabbirka ugu badan ee xaashida (mm)	2200 (W) x 1650 (L)
Cabbirka ugu yar ee xaashida (mm)	600 x 600 / 800 x 600
Dhumucda xaashida sare (g/㎡)	200-450
Xaashida hoose ee ku habboon	Loox jiingado leh (A/B/C/D/E/F/N-flute, 3-laad, 4-laad, 5-laad iyo 7-laad); loox cawlan; kartoon; loox KT, ama warqad ilaa warqad dahaadh ah
Xawaaraha ugu badan ee shaqada (m/daqiiqo)	130 m/daqiiqo
Saxnaanta laambadda (mm)	< ± 1.5mm
Awood (kw)	27
Awoodda Stacker (kw)	10.8
Miisaanka (kg)	16800
Cabbirka mashiinka (mm)	24800 (L) x 3320 (B) x 3000 (H)

FAA'IIDOOYINKA

Nidaamka xakamaynta dhaqdhaqaaqa ee isku-dubaridka iyo xakamaynta ugu weyn.

Masaafada ugu yar ee warqadaha waxay noqon kartaa 120 mm.

Matoorada Servo si loogu hagaajiyo booska laminating-ka hore iyo kan dambe ee xaashiyaha sare.

Nidaamka dabagalka xaashiyaha otomaatiga ah, xaashiyaha sare waxay raadraacaan xaashiyaha hoose.

Shaashadda taabashada si loo xakameeyo loona kormeero.

Qalabka nooca Gantry-ka ee hore loogu shubo si fudud loogu dhigo xaashida sare.

Stacker-ka Warqadda Toosan wuxuu si otomaatig ah u heli karaa warqad.

ASTAAMAHA

A. XAKAMEYNTA SIRDOONKA

● Kontoroolka Dhaqdhaqaaqa ee American Parker wuxuu dhameystirayaa dulqaadka lagu xakameynayo isku-xidhka
● Gawaarida Yaskawa ee Japan Servo waxay u oggolaanayaan mashiinku inuu si deggan oo dhaqso badan u shaqeeyo

Mashiinka Laminating Flute Speed-High-Out 2

B. QAYBTA Quudinta XIRMO DUSHA SARE

● Quudiyaha ay leedahay shatigu
● Nooca Faakuumka
● Xawaaraha ugu badan ee quudinta waa ilaa 160m/daqiiqad

C. QAYBTA XAKAMEYNTA

● Kormeeraha Shaashadda Taabashada, HMI, oo leh nooca CN/EN
● Deji cabbirka xaashida, beddel masaafada xaashida iyo la socodka xaaladda hawlgalka

Mashiinka Laminating Flute Speed-High-Out3

D. QAYBTA DAAHA

● Roogga dhejiska ah ee Rhombic wuxuu ka hortagaa in xabagta ay daadato
● Qalabka dhejiska iyo dib-u-warshadaynta dheeraadka ah ayaa ka caawiya ka fogaanshaha qashinka kheyraadka

E. QAYBTA GUDBINTA

● Suumanka waqtiga ee la soo dhoofiyo waxay xalliyaan dhibaatada dahaarka aan saxda ahayn ee silsiladda duugowday awgeed

Mashiinka Laminating-ka Buufiska Xawaaraha Sare ee Buufiska ah 5

F. KHUSEYS SARE

● B/E/F/G/C9-flute hal-hal ah; 3 lakab oo loox ah oo tolmo ah; 4 lakab oo BE/BB/EE ah oo foorno labanlaab ah; 5 lakab oo tolmo ah
● Loox laba-geesood ah
● Looxa cawlan

Mashiinka Buuxinta Buundada-Xawaaraha Sare-Otomaatiga ah9

Looxa Toosan B/E/F/G/C9-flute 2-lakab ilaa 5-lakab

Mashiinka Buuxinta-Otomaatiga ah ee Xawaaraha Sare leh ee Fuulista-Laminating8

Guddi Laba-geesood ah

Mashiinka Buuxa ee Xawaaraha Sare leh ee Buufinta-Laminating10

Guddi Cawlan

G. QAYBTA QAADINTA WARQADDA HOOS KU XUSAN (IKHTIYAARI AH)

● Suunka Nuugista Hawada ee Aad u Xooggan
● Nooca Cidhifka Hore (Ikhtiyaar)

H. QAYBTA KAHOR-U-SOO-RAACIDDA

● Way fududahay in la dhigo tuulmada xaashida sare
● Matoorka Adeegga Yaskawa ee Jabbaan

Mashiinka Laminating-ka Buufinta Xawaaraha Sare ee Buufinta oo Buuxa1

FAAHFAAHINTA MOODALKA HBZ

A. Qaybaha Korontada

Mashiinka Shanhe wuxuu mashiinka HBZ ku meeleeyaa warshadaha xirfadeed ee Yurub. Mashiinka oo dhan wuxuu adeegsadaa noocyo caalami ah oo caan ah, sida Parker (USA), P+F (GER), Siemens (GER), Omron (JPN), Yaskawa (JPN), Schneider (FRA), iwm. Waxay dammaanad qaadayaan xasilloonida iyo cimri dhererka hawlgalka mashiinka. Xakamaynta isku dhafan ee PLC iyo barnaamijkeena is-soo-ururinta ayaa hirgeliya maaraynta farsamada si loo fududeeyo tallaabooyinka hawlgalka loona badbaadiyo kharashka shaqada.

B. Nidaamka Xakamaynta Elektarooniga ah ee Gawaadhida oo Buuxa

Xakamaynta PLC, hawlgalka shaashadda taabashada, booska koontaroolka fog iyo matoorka servo waxay u oggolaanayaan shaqaalaha inay cabbirka warqadda ka dhigaan shaashadda taabashada oo ay si toos ah u hagaajiyaan booska diritaanka xaashida sare iyo xaashida hoose. Usha boolal ee tareenka simbiriirixan ee la soo dhoofiyay waxay ka dhigaysaa booska mid sax ah; qaybta riixitaanka waxaa sidoo kale ku yaal koontarool fog oo loogu talagalay hagaajinta booska hore iyo kan dambe. Mashiinku wuxuu leeyahay shaqo kaydinta xusuusta si uu u xasuusto badeecad kasta oo aad keydisay. HBZ wuxuu gaaraa otomaatiga dhabta ah iyadoo leh shaqeyn buuxda, isticmaal yar, hawlgal fudud iyo la qabsi xooggan.

C. Quudiyaha

Waa badeecad shati leh oo ay leedahay shirkadda Guangdong Shanhe Industrial Co., Ltd.. oo leh qalab quudin oo heer sare ah oo daabacaha loo isticmaalo iyo qalab xooggan oo dira warqad oo leh afar af-nuugid iyo afar af-quudin quudin ah ayaa hubiya in warqaddu sax tahay oo siman tahay. Goob dibadda ah oo loogu talagalay in lagu raro warqadaha hore loo raro ayaa loo qalabeeyay in la dhigo waqti iyo meel loogu talagalay in lagu raro warqadaha hore loo raro, taas oo ammaan ah oo la isku halleyn karo, si buuxdana u buuxisa shuruudaha socodsiinta hufan ee sare.

D. Qaybta Gudbinta Warqadda Hoose

Matoorka Servo wuxuu ku shaqeeyaa suunka nuugista si uu u diro warqad hoose oo ay ku jiraan kartoon, loox cawlan iyo loox jiingado ah oo 3-geesood ah, 4-geesood ah, 5-geesood ah iyo 7-geesood ah oo leh A/B/C/D/E/F/N-flute. Dirista waa mid siman oo sax ah.

Iyada oo leh naqshad nuugid xooggan, mashiinku wuxuu soo diri karaa warqad dhumucdeedu u dhaxayso 250-1100g/㎡.

Qaybta quudinta xaashida hoose ee HBZ-170 waxay isticmaashaa bamka laba-geesoodka ah oo leh xakamaynta waalka laba-geesoodka ah, oo ujeeddadeedu tahay warqad ballackeedu yahay 1100+mm, waxay bilaabi kartaa bamka hawada labaad si loo kordhiyo mugga nuugista hawada, si fiican ugu shaqeyso gudbinta wareegyada iyo guddiga dahaarka qaro weyn.

E. Nidaamka Wadista

Waxaan isticmaalnaa suunka waqtiga ee la soo dejiyo halkii aan ka isticmaali lahayn silsiladda taayirrada dhaqameed si aan u xallinno dhibaatada dahaarka aan saxda ahayn ee u dhexeeya xaashida sare iyo xaashida hoose ee ay sabab u tahay silsiladda duugowday iyo xakamaynta qaladka dahaarka gudaha ±1.5mm, sidaas darteed waxaan ku fulinnaa dahaarka ugu habboon.

Nidaamka Dahaarka Xabagta F

Hawlgalka xawaaraha sare, si loo simi karo koolada, Shanhe Machine wuxuu naqshadeeyaa qayb dahaadh ah oo leh duub dahaadh gaar ah iyo qalab aan lahayn xabag si loo xalliyo dhibaatada ku buufinta koolada. Qalabka dheeraadka ah iyo dib-u-warshadaynta ee otomaatiga ah oo dhammaystiran ayaa si wada jir ah uga caawiya ka fogaanshaha qashinka koolada. Sida waafaqsan shuruudaha badeecada, hawl-wadeennadu waxay ku hagaajin karaan dhumucda koolada giraangiraha xakamaynta; iyadoo la adeegsanayo duubka caagga ah ee xariijimaha leh waxay si wax ku ool ah u xallisaa dhibaatada ku buufinta koolada.

FAAHFAAHINTA MOODELKA LF

LF-145/165 Stacker Paper Vertical waa qalab loogu talagalay in lagu xiro laminator-ka biibiilaha xawaaraha sare leh si loo xaqiijiyo shaqada is dulsaarka warqadda ee otomaatiga ah. Waxay isku ururisaa badeecada lamination-ka ee la dhammeeyay oo u rogtaa tuulmo iyadoo loo eegayo tirada dejinta. Mashiinku wuxuu isku daraa hawlaha rogrogista warqadda si joogto ah, u rogista warqadda dhinaca hore ama dhinaca dambe iyo is dulsaarka nadiifka ah; ugu dambayntii waxay si otomaatig ah u riixi kartaa tuulmada warqadda. Ilaa hadda, waxay ka caawisay shirkado badan oo daabacan iyo baakado inay wax ka qabtaan dhibaatada shaqo la'aanta, inay hagaajiyaan xaaladda shaqada, inay badbaadiyaan shaqada oo xooggan iyo inay si weyn u kordhiyaan wax soo saarka guud.

A. DUSHA HOOS U DHACAY

● Isticmaal suumanka caagga ah ee ballaaran si aad ugu xirto laminator-ka si uu si isku mid ah u shaqeeyo.
● Deji tiro cayiman oo warqad ah oo la isku soo ururiyo, marka la gaaro lambarkaas, warqadda waxaa si toos ah loogu diri doonaa qaybta rogrogmada (kii ugu horreeyay ee la keenayo).
● Waxay warqadda ka taabatay dhinaca hore iyo labada dhinac si ay warqadda si fiican ugu dul sabbayso.
● Meelaynta saxda ah oo ku salaysan tiknoolajiyada soo noqnoqoshada isbeddelka leh.
● Rinjiyeynta warqadaha oo ay wado matoorku.
● Riixitaan warqad ah oo aan u adkeysan karin.

B. QAYBTA QALABKA QAADISTA

C. QAYBTA ROGIDDA

D. GELITAANKA SAXAAFADDA

● Marka warqadda loo diro qaybta rogrogmada, matoorka kor u qaadaya ayaa warqadda kor u qaadi doona ilaa dhererka dejinta.
● Inta lagu jiro habka labaad ee keenista, warqad ayaa loo diri doonaa meesha ugu weyn ee lagu kaydiyo.
● Meelaynta saxda ah oo ku salaysan tiknoolajiyada soo noqnoqoshada isbeddelka leh.
● Warqadda matoorka ku shaqeysa oo rogrogmi karta. Warqadda waxaa lagu dhejin karaa hal tuulmo oo hore ah oo kor u socota iyo hal tuulmo oo gadaal ah oo is barbar socda, ama dhammaantood iyadoo dhinacyadooda hore kor loo qaadayo oo dhinacyadooda dambe kor loo qaadayo.
● Isticmaal matoorka soo noqnoqoshada isbeddelka leh si aad u riixdo warqadda.
● Meesha laga galo saxanka.
● Xakamaynta shaashadda taabashada.

E. ISTAAGGA WEYN

F. QAYBTA TAAGEERIDA

● Booska dambe, iyo salaaxid warqad ah oo ka socota 3 dhinac: dhinaca hore, dhinaca bidix iyo dhinaca midig.
● Qalabka hore u sii rarida si aan kala joogsi lahayn.
● Dhererka xarkaha warqadda waa la hagaajin karaa inta u dhaxaysa 1400mm ilaa 1750mm. Dhererka waa la kordhin karaa iyadoo loo eegayo shuruudaha macaamiisha.

G. QAYBTA GUDBINAYA

● Marka uu buuxsamo qalabka buuxinta warqadaha, matoorku si toos ah ayuu u soo saari doonaa.
● Isla mar ahaantaana, saxaaradda madhan ayaa kor loogu qaadi doonaa meeshii asalka ahayd.
● Tuulmada warqadda waxaa jiidi doona jaakad balaastig ah oo ka soo baxaysa jiirada.

Liiska Falanqaynta Xisaabinta Waxqabadka Shaqada ee Stacker ee Waraaqaha Toosan

Nooca Shaqada	Soo-saar saacadle ah
Hal-Fuuleed E ah	9000-14800 saacaddii
B-flute keliya	8500-11000 saacaddii
Fuulaad E-laba ah	9000-10000 saacaddii
5-xabbo oo BE-fuulka ah	7000-8000 saacaddii
5-qaybood oo BC-fuuleed ah	6000-6500 saacaddii
PS: xawaaraha stacker-ku wuxuu ku xiran yahay dhumucda dhabta ah ee looxa