Umatshini wokusika i-die ozenzekelayo we-HMC-1080HD (uhlobo olunzima lwe-600T) Umfanekiso obonisiweyo

Umatshini wokusika i-HMC-1080HD ozenzekelayo (uhlobo olunzima lwe-600T)

Inkcazo emfutshane:

Umatshini wokusika iidayi ozenzekelayo we-HMC-1080HD sisixhobo esifanelekileyo esifanelekileyo kwibhodi engwevu ethe tyaba yokusika iidayi, ibhodi ye-corrugation ye-3/5/7-ply. Ukuzisebenzela kwayo ngokupheleleyo kwenza ukusebenza kwayo kukhuseleke ngakumbi, isantya semveliso sikhawuleze kwaye ukuchaneka kokusika iidayi kube phezulu. Ineempawu zegeyiji yangaphambili, uxinzelelo kunye nenkqubo yokulungisa ngokuzenzekelayo ubungakanani bephepha.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

UMBONISO WEMVELISO

IINKCUKACHA

I-HMC-1080HD (IsiNgesi)6Uhlobo olunzima lwe-00T, olunetafile yokujonga isampuli, olune-3-side stripping kunye nomsebenzi wokucoca imingxunya）
Ubungakanani bePhepha obuphezulu (mm)	1080(W) x 780(L)
Ubungakanani bePhepha obuncinci (mm)	400(W) x 360(L)
Ubungakanani bokusika obuphezulu (mm)	1070(W) x 770(L)
Ubukhulu bephepha (mm)	Ikhadibhodi eyi-0.1-1.5；≤4 ibhodi erhabaxa
	Ikhadibhodi eyi-0.1-2.5；≤4 ibhodi erhabaxa
	kuxhomekeke kumgca weblade yemveliso yokwenyani
Isantya sokuSebenza esiphezulu (ii-pcs/hr)	7000
Ukusika Ngokuthe Ngqo (mm)	± 0.1
Uluhlu loxinzelelo (mm)	2
Uxinzelelo oluphezulu lokusebenza (T)	600
Amandla ewonke (kw)	16
Ukuphakama koMgca weBlade (mm)	23.8
Ukuphakama kwePile yePhepha (m)	1.6
Ubunzima bomatshini (T)	15
Ubungakanani bomatshini (mm)	6300(L) x 3705(W) x 2350(H)
Uvavanyo	380V, 50Hz

IINKCUKACHA

1. Isixhobo sokutya

Ngobuchwepheshe baseYurophu, esi sixhobo sokutya siyafumaneka ukuze sihambise amakhadibhodi kunye nephepha elirhabaxa. Sizinzile kwaye sichanekile!

Imodeli yoMatshini wokuSika ngokuZenzekelayo i-HMC-10802

Imodeli yoMatshini wokuSika ngokuZenzekelayo i-HMC-10803

2. Ivili Elicinezelweyo Elincinci

Ingazilungisa ngokweemveliso ezahlukeneyo ngobukhulu ngaphandle kokukrwela iphepha!

3. Inkqubo yoLawulo oluCwangcisiweyo lwe-PLC

I-electrical par isebenzisa inkqubo yolawulo ecwangcisiweyo ye-PLC, yenza ukutyiswa kwephepha, ukuthutha kunye nokusika emva koko ngolawulo oluzenzekelayo kunye novavanyo. Kwaye ixhotyiswe ngeentlobo ngeentlobo zeswitshi zokhuseleko ezinokuvalwa ngokuzenzekelayo xa kukho imeko engalindelekanga.

Imodeli yoMatshini wokuSika ngokuZenzekelayo i-HMC-10804

Imodeli yoMatshini wokuSika ngokuZenzekelayo i-HMC-10805

4. Inkqubo yoMqhubi

Inkqubo ephambili yomqhubi isebenzisa ivili leempethu, isibini segiya leempethu kunye nolwakhiwo lwe-crankshaft, ukuqinisekisa ukuba umatshini usebenza ngokuzinzileyo nangokuchaneka okuphezulu. Izinto ezisetyenziswa kwivili leempethu zii-alloys ezikhethekileyo zobhedu.

5. Isitayile sokuThutha uxinzelelo lweBelt

Itekhnoloji eyahlukileyo yesitayile sokuhambisa uxinzelelo lwebhanti, inokukuphepha ukugoba umjikelo wephepha xa kungqubana, kwaye ifezekise uxinzelelo olupheleleyo lohlobo lwephepha lokutya oluphambili ngendlela yendabuko.