I-HBF-145/170/220 Isantya Esiphezulu Esipheleleyo Esizenzekelayo Zonke-kwi-One Flute Laminator Umfanekiso Obonakalayo

I-HBF-145/170/220 Isantya Esiphezulu Esizenzekelayo Zonke-kwi-One Flute Laminator

Inkcazo emfutshane:

Imodeli ye-HBF Full-auto High Speed All-in-One Flute Laminator ngumatshini wethu okrelekrele kakhulu, oqokelela ukutya okukhawulezayo, ukuncamathisela, ukulamina, ukucinezela, ukufunxa i-flip flop kunye nokuhambisa ngokuzenzekelayo. I-laminator isebenzisa isilawuli sokuhamba esiphambili samazwe ngamazwe ekulawuleni. Isantya esiphezulu somatshini sinokufikelela kwi-160m/min, esijolise ekufezekiseni iimfuno zabathengi zokuhambisa ngokukhawuleza, ukusebenza kakuhle kwemveliso kunye neendleko eziphantsi zomsebenzi.

I-stacker iqokelela imveliso ye-lamination egqityiweyo ibe yinqwaba ngokwenani elimiselweyo. Ukuza kuthi ga ngoku, incede iinkampani ezininzi zokuprinta nezokupakisha ukujongana nengxaki yokunqongophala kwabasebenzi, ukuphucula imeko yokusebenza, ukonga abasebenzi abaninzi kunye nokunyusa kakhulu imveliso iyonke.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

UMBONISO WEMVELISO

IINKCUKACHA

I-HBF-145
Ubungakanani bephepha eliphezulu (mm)	1450 (Ububanzi) x 1300 (Ububanzi) / 1450 (Ububanzi) x 1450 (Ububanzi)
Ubungakanani bephepha elincinci (mm)	360 x 380
Ubukhulu bephepha eliphezulu (g/㎡)	128 - 450
Ubukhulu bephepha elisezantsi (mm)	0.5 – 10 (xa sidibanisa ikhadibhodi elaminethiweyo nekhadibhodi, sifuna iphepha elingaphantsi libe ngaphezu kwama-250gsm)
Iphepha elingaphantsi elifanelekileyo	Ibhodi eneentsimbi (A/B/C/D/E/F/N-flute, 3-ply, 4-ply, 5-ply kunye ne-7-ply); ibhodi engwevu; ikhadibhodi; ibhodi ye-KT, okanye i-lamination yephepha ukuya ephepheni
Isantya esiphezulu sokusebenza (m/min)	160m/min (xa ubude beflute buyi-500mm, umatshini unokufikelela kwisantya esiphezulu se-16000pcs/hr)
Ukuchaneka kwe-lamination (mm)	±0.5 - ±1.0
Amandla(kw)	16.6 (ayibandakanyi i-air compressor)
Amandla eStacker(kw)	7.5 (ayibandakanyi i-air compressor)
Ubunzima (kg)	12300
Ubukhulu bomatshini (mm)	21500(L) x 3000(W) x 3000(H)

I-HBF-170
Ubungakanani bephepha eliphezulu (mm)	1700 (Ububanzi) x 1650 (Ububanzi) / 1700 (Ububanzi) x 1450 (Ububanzi)
Ubungakanani bephepha elincinci (mm)	360 x 380
Ubukhulu bephepha eliphezulu (g/㎡)	128 - 450
Ubukhulu bephepha elisezantsi (mm)	0.5-10mm (ukuze kube yikhadibhodi ukuya kwikhadibhodi, i-lamination: 250+gsm)
Iphepha elingaphantsi elifanelekileyo	Ibhodi eneentsimbi (A/B/C/D/E/F/N-flute, 3-ply, 4-ply, 5-ply kunye ne-7-ply); ibhodi engwevu; ikhadibhodi; ibhodi ye-KT, okanye i-lamination yephepha ukuya ephepheni
Isantya esiphezulu sokusebenza (m/min)	160 m/min (xa usebenzisa iphepha elingama-500mm, umatshini ungafikelela kwisantya esiphezulu sama-16000pcs/hr)
Ukuchaneka kwe-lamination (mm)	± 0.5mm ukuya ku ± 1.0mm
Amandla(kw)	23.57
Amandla eStacker(kw)	9
Ubunzima (kg)	14300
Ubukhulu bomatshini (mm)	23600 (L) x 3320 (W) x 3000 (H)

I-HBF-220
Ubungakanani bephepha eliphezulu (mm)	2200 (Ububanzi) x 1650 (Ububanzi)
Ubungakanani bephepha elincinci (mm)	600 x 600 / 800 x 600
Ubukhulu bephepha eliphezulu (g/㎡)	200-450
Iphepha elingaphantsi elifanelekileyo	Ibhodi eneentsimbi (A/B/C/D/E/F/N-flute, 3-ply, 4-ply, 5-ply kunye ne-7-ply); ibhodi engwevu; ikhadibhodi; ibhodi ye-KT, okanye i-lamination yephepha ukuya ephepheni
Isantya esiphezulu sokusebenza (m/min)	130 m/ngomzuzu
Ukuchaneka kwe-lamination (mm)	< ± 1.5mm
Amandla(kw)	27
Amandla eStacker(kw)	10.8
Ubunzima (kg)	16800
Ubukhulu bomatshini (mm)	24800 (L) x 3320 (W) x 3000 (H)

IINZUZO

Inkqubo yokulawula intshukumo yokulungelelanisa kunye nokulawula okuphambili.

Umgama omncinci wamaphepha unokuba yi-120mm.

Iimoto zeServo zokulungelelanisa indawo yokulaminatha yamaphepha aphezulu ngaphambili nangasemva.

Inkqubo yokulandelela amaphepha ngokuzenzekelayo, amaphepha aphezulu alandelela amaphepha asezantsi.

Isikrini sokuchukumisa ukuze ulawule kwaye ubeke esweni.

Isixhobo sokufaka i-gantry type pre-loading ukuze kube lula ukubeka iphepha eliphezulu.

I-Stacker yePhepha ethe nkqo inokuphumeza ukwamkelwa kwephepha ngokuzenzekelayo.

IIMBONAKALO

A. ULAWULO OLUNGQONDO

● Umlawuli weMotion we-American Parker uncedisa ukunyamezela ukulawula ulungelelwaniso
● Iimoto zaseJapan zeYASKAWA Servo Motors zivumela umatshini ukuba usebenze ngokuzinzileyo nangokukhawuleza

Umatshini wokulaminetha weFlute Laminating oGqibeleleyo oZenzekelayo2

B. ICANDELO LOKUTYISA AMASHITI ANGAPHEZULU

● Isixhobo sokuphakela esiphethwe yiPatent
● Uhlobo lwe-Vacuum
● Isantya esiphezulu sokondla sifikelela kwi-160m/min

C. ICANDELO LOKULAWULA

● Isikrini sokuchukumisa, i-HMI, kunye nohlobo lwe-CN/EN
● Beka ubungakanani bamashiti, tshintsha umgama wamaphepha kwaye ubeke iliso kwimeko yokusebenza

Umatshini wokulaminetha weFlute Laminating oGqibeleleyo oZenzekelayo3

D. ICANDELO LOKUGQIBELA

● Irola yokuncamathelisa i-Rhombic ithintela iglu ukuba ingatshizi
● Isixhobo esongezelelweyo sokuncamathelisa kunye nesokurisayikilisha sinceda ukunqanda ukumoshwa kwezixhobo

E. ICANDELO LOKUTHUMELA

● Iibhanti zexesha ezivela kwamanye amazwe zisombulula ingxaki yokungachaneki kwe-lamination ngenxa yetsheyini egugileyo

Umatshini wokuLaminating weFlute ohamba ngesantya esiphezulu ozenzekelayo5

F. UKUSEBENZA OKUPHEZULU

● Iflethi enye ye-B/E/F/G/C9; ibhodi ye-corrugation enamaleko ama-3; iflethi ephindwe kabini ye-BE/BB/EE enamaleko ama-4; ibhodi ye-corrugation enamaleko ama-5
● Ibhodi yeDuplex
● Ibhodi engwevu

Umatshini wokuLaminating oGqibeleleyo-oZenzekelayo-oPhezulu-ngesantya-eSiphezulu9

Ibhodi yeCorrugated B/E/F/G/C9-iflute 2-ply ukuya kwi-5-ply

Umatshini wokuLaminating oGqibeleleyo-oZenzekelayo-oPhezulu-ngesantya-eSiphezulu8

Ibhodi yeDuplex

Umatshini wokulaminetha weFlute oZenzekelayo oPhezulu 10

Ibhodi engwevu

G. ICANDELO LOKUTYISA AMAPHEPHA ANGAPHANTSI (OKUNGANYANZELEKANGA)

● Iibhanti Zomoya Ezinamandla Kakhulu
● Uhlobo loMphetho ongaphambili (Ukhetho)

H. ICANDELO LOKULAYISHA NGAPHAMBI

● Kulula ukubeka inqwaba yephepha eliphezulu
● Injini yeYaskawa Servo yaseJapan

Umatshini wokulaminetha weFlute Laminating oGqibeleleyo oZenzekelayo1

IINKCUKACHA ZEMODE HBZ

A. Izixhobo zoMbane

Umatshini weShanhe ubeka umatshini weHBZ kushishino lobungcali lwaseYurophu. Lo matshini wonke usebenzisa iimpawu ezaziwayo zamazwe ngamazwe, ezifana neParker (USA), P+F (GER), Siemens (GER), Omron (JPN), Yaskawa (JPN), Schneider (FRA), njl. Ziqinisekisa uzinzo kunye nokuqina kokusebenza komatshini. Ulawulo oluhlanganisiweyo lwe-PLC kunye nenkqubo yethu esiziqokeleleyo yenza ukuba i-mechatronics ilawuleke lula kakhulu kwaye yonge iindleko zomsebenzi.

B. Inkqubo yoLawulo lwe-elektroniki oluQhelekileyo oluZiqhubayo

Ulawulo lwe-PLC, ukusebenza kwesikrini sokuchukumisa, isikhundla somlawuli okude kunye ne-servo motor zivumela umsebenzi ukuba abeke ubungakanani bephepha kwisikrini sokuchukumisa aze alungise indawo yokuthumela iphepha eliphezulu kunye nephepha elisezantsi ngokuzenzekelayo. Intonga yesikrufu esityibilikayo esingenisiweyo yenza indawo ibe chanekileyo; kwindawo yokucinezela kukho nomlawuli okude wokulungisa indawo yangaphambili nangasemva. Umatshini unomsebenzi wokugcina imemori ukukhumbula imveliso nganye oyigcinileyo. I-HBZ ifikelela kwi-automation yokwenyani ngokusebenza okugcweleyo, ukusetyenziswa okuphantsi, ukusebenza okulula kunye nokuzivumelanisa nezimo ngamandla.

C. Isondli

Yimveliso enelungelo lobunikazi yeGuangdong Shanhe Industrial Co., Ltd.. I-feeder esetyenziswa kwiprinta ephezulu kunye nesixhobo sokuthumela iphepha esomeleleyo esineempumlo ezine zokufunxa kunye neempumlo ezine zokufunxa ziqinisekisa ukuhanjiswa kwephepha ngokuchanekileyo nangokugudileyo. Iqonga lokulayisha kwangaphambili lohlobo lwesango langaphandle lixhotyiswe ukubekela bucala ixesha nendawo yokulayisha amaphepha kwangaphambili, ekhuselekileyo nethembekileyo, ehlangabezana ngokupheleleyo neemfuno zokusebenza kakuhle.

D. Icandelo Lokuhambisa Iphepha Elisezantsi

Injini yeServo iqhuba iibhanti zokufunxa ukuze ithumele iphepha elisezantsi eliquka ikhadibhodi, ibhodi engwevu kunye nebhodi ebotshelelweyo ene-3-ply, 4-ply, 5-ply kunye ne-7-ply ene-A/B/C/D/E/F/N-flute. Ukuthunyelwa kwayo kuthambile kwaye kuchanekile.

Ngoyilo oluqinileyo lokufunxa, umatshini unokuthumela iphepha elinobukhulu obuphakathi kwe-250-1100g/㎡.

Inxalenye yokutya esezantsi yephepha le-HBZ-170 isebenzisa ipompo ye-vortex ene-dual-solenoid control, ejolise kwiphepha elinobubanzi obuyi-1100+mm, inokuqalisa ipompo yesibini yomoya ukuze yonyuse umthamo womoya, isebenze ngcono kwibhodi yokugoba yokuhambisa kunye nebhodi yokugoba etyebileyo.

E. Inkqubo yokuqhuba

Sisebenzisa iibhanti zexesha ezingenisiweyo endaweni yetyathanga lamavili lendabuko ukusombulula ingxaki ye-lamination engachanekanga phakathi kwephepha eliphezulu kunye nephepha elisezantsi ngenxa yetyathanga eligugileyo kwaye silawula impazamo ye-lamination ngaphakathi kwe-±1.5mm, ngaloo ndlela sizalisekisa i-lamination egqibeleleyo.

F. Inkqubo Yokugquma Iglu

Kwindlela esebenza ngesantya esiphezulu, ukuze iglue igqunywe ngokulinganayo, iShanhe Machine iyila inxalenye yokugquma ngerola yokugquma ekhethekileyo kunye nesixhobo esingatshiyo seglue ukusombulula ingxaki yokutshiza iglue. Isixhobo esongezelelweyo esizenzekelayo sokuncamathelisa kunye nesixhobo sokurisayikilisha kunye sinceda ukuphepha ukuchithwa kweglue. Ngokweemfuno zemveliso, abaqhubi banokulungisa ubukhulu beglue ngevili elilawulayo; ngerolara yerabha ekhethekileyo enemigca isombulula ngempumelelo ingxaki yokutshiza iglue.

IINKCUKACHA ZEMODELI LF

I-LF-145/165 Vertical Paper Stacker yenzelwe ukuqhagamshela nge-laminator yeflute ekhawulezayo ukuze kufezekiswe umsebenzi wokufaka iphepha ngokuzenzekelayo. Ibeka imveliso ye-lamination egqityiweyo ibe yinqwaba ngokwenani lokuseta. Umatshini udibanisa imisebenzi yokujika iphepha rhoqo, ubeka iphepha ngaphambili phezulu okanye ngasemva phezulu kwaye ucoceke; ekugqibeleni inokutyhala ngokuzenzekelayo inqwaba yephepha. Ukuza kuthi ga ngoku, incede iinkampani ezininzi zokuprinta nokupakisha ukujongana nengxaki yokunqongophala kwabasebenzi, ukuphucula imeko yokusebenza, ukonga umsebenzi onzima kwaye wonyuse kakhulu imveliso iyonke.

A. I-SUB-STACKER

● Sebenzisa iibhanti zerabha ezibanzi ukuze uzidibanise ne-laminator ukuze zisebenze ngokulandelelana.
● Misela ubungakanani obuthile bokufaka iphepha, xa ufikelela kuloo nombolo, iphepha liya kuthunyelwa ngokuzenzekelayo kwiyunithi yokujika (eyokuqala ethunyelwayo).
● Ichukumisa iphepha ukusuka ngaphambili nasemacaleni amabini ukuze iphepha liqokeleleke kakuhle.
● Indawo echanekileyo esekelwe kwiteknoloji yefrikhwensi eguquguqukayo.
● Iphepha elityhalwa yimoto.
● Ukutyhala iphepha okungamelaniyo.

B. INDAWO YOKUPHAKISA

C. IYUNITHI YOKUPHENDULA

D. INDAWO YOKUNGENA ITRAYI

● Xa iphepha lithunyelwa okokuqala kwiyunithi yokujika, i-lifting motor iya kuphakamisa iphepha liye kufikelela kubude obufunekayo.
● Ngexesha lenkqubo yesibini yokuhambisa, iphepha liza kuthunyelwa kwi-stacker ephambili.
● Indawo echanekileyo esekelwe kwiteknoloji yefrikhwensi eguquguqukayo.
● Ukujika iphepha eliqhutywa yimoto. Iphepha lingabekwa ngecala elinye elingaphambili phezulu nelinye icala elingasemva libekwe ngokwahlukana, okanye onke amacala angaphambili abekwe phezulu kwaye onke amacala angasemva abekwe phezulu.
● Sebenzisa i-motor ye-variable frequency ukutyhala iphepha.
● Ukungena kwetreyi.
● Ulawulo lwesikrini sokuchukumisa.

E. ISITAKSHI ESIPHAMBILI

F. INXALENYE EXHASAYO

● Indawo ebekwe ngasemva, kunye nokupeyinta amaphepha kumacala amathathu: icala langaphambili, icala lasekhohlo kunye necala lasekunene.
● Isixhobo sokufaka izinto kwangaphambili ukuze zihanjiswe ngokungayekiyo.
● Ukuphakama kokufakwa kwephepha kunokulungiswa phakathi kwe-1400mm ukuya kwi-1750mm. Ukuphakama kunokwandiswa ngokweemfuno zabathengi.

G. INXALENYE YOKUHANJISWA

● Xa i-paper stacker igcwele, injini iya kukhupha inqwaba yephepha ngokuzenzekelayo.
● Kwangaxeshanye, itreyi engenanto iya kuphakanyiswa iye kwindawo yayo yokuqala.
● Inqwaba yephepha iya kutsalwa yi-pallet jack esuka kwithambeka.

Uluhlu loHlalutyo loHlalutyo loBuchule bokusebenza kakuhle kweStacker yePhepha eliMileyo lika-H.

Uhlobo lomsebenzi	Iziphumo zeyure
I-E-flute enye	9000-14800 ngeyure
Iflethi enye ye-B	8500-11000 ngeyure
I-E-flute ephindwe kabini	9000-10000 ngeyure
I-BE-flute enezibonda ezi-5	7000-8000 ngeyure
I-BC-flute enezibonda ezi-5	6000-6500 ngeyure
PS: isantya se-stacker sixhomekeke kubukhulu bebhodi yokwenyani