HBF-3/1450/1700/2200 Smart Xawaaraha Sare ee Flute Laminator oo leh Flip Flop Stacker
Tilmaamid
| HBF-3/1450 | |
| Max.cabbirka warqadda | 1450×1450 mm |
| Min.cabbirka warqadda | 360×380 mm |
| Dhumucda xaashida sare | 128 g/㎡-450 g/㎡ |
| Dhumucda xaashida hoose | 0.5-10mm |
| Max.xawaaraha shaqada | 200 m/daqiiqo |
| Cilad lamination | ± 0.5 - ± 1.0 mm |
| Awoodda mishiinka | Nooca cidhifka rasaasta: 28.75kw Nooca suunka: 30.45kw |
| Awoodda dhabta ah | Nooca cidhifka rasaasta: 25.75kw Nooca suunka: 27.45kw |
| Cabbirka mishiinka(L×W×H) | 22248×3257×2988 mm |
| Miisaanka mashiinka | 7500 kg+4800 kg |
| HBF-3/1700 | |
| Max.cabbirka warqadda | 1700×1650 mm |
| Min.cabbirka warqadda | 360×380 mm |
| Dhumucda xaashida sare | 128 g/㎡-450 g/㎡ |
| Dhumucda xaashida hoose | 0.5-10mm Xaashiyaha xaashida ku dhejinta: 250+gsm |
| Max.xawaaraha shaqada | 200 m/daqiiqo |
| Cilad lamination | ± 0.5 - ± 1.0 mm |
| Awoodda mishiinka | Nooca cidhifka rasaasta: 31.3kw Nooca suunka: 36.7kw |
| Awoodda dhabta ah | Nooca cidhifka rasaasta: 28.3kw Nooca suunka: 33.7kw |
| Cabbirka mashiinka (L×W×H) | 24182×3457×2988 mm |
| Miisaanka mashiinka | 8500 kg+5800 kg |
| HBF-3/2200 | |
| Max.cabbirka warqadda | 2200×1650 mm |
| Min.cabbirka warqadda | 380×400 mm |
| Dhumucda xaashida sare | 128 g/m²-450 g/m² |
| Dhumucda xaashida hoose | Looxa jiingadaha |
| Max.xawaaraha shaqada | 200 m/daqiiqo |
| Cilad lamination | ± 1.5 mm |
| Awoodda mishiinka | Nooca cidhifka rasaasta: 36.3kw Nooca suunka: 41.7kw |
| Awoodda dhabta ah | Nooca cidhifka rasaasta: 33.3kw Nooca suunka: 38.7kw |
| Cabbirka mashiinka (L×W×H) | 24047×3957×2987 mm |
| Miisaanka mashiinka | 10500 kg+6000 kg |
Astaamaha
Max.xawaaruhu waa 20,000 pcs/saacadii.
Xakamaynta hal taabasho, xawli sare oo sax ah.
Heerka EU, hawlgal sugan.
Waxay khusaysaa laysarka u dhexeeya warqad daabacan oo midab leh iyo looxa jiingado ah (A/B/C/E/F/G-flute, biibiile double, 3 lakab, 4 lakab, 5 lakab, 7 lakab), kartoon ama looxa cawl, iyo sidoo kale ku haboon loogu talagalay "lamination sandwich".
Mashiinka Jiilka 3aad Waxa uu la socdaa hawlo cusub:
gelinta dhijitaalka ah.Bilawga hal taabasho waxa ka mid ah:
A. Kor-u-qaadista qaybta hagaajinta
B. Feeder's FWD & BWD hagaajinta
C. Cabbirka xaashida sare
D. Cabbirka xaashida hoose
E. Cadaadis toos ah oo toos ah
F. hagaajinta qadarka xabagta
G. Servo meelaynta
H. Dejinta fogaanta warqadda
I. Riixitaanka qaybta FWD & hagaajinta BWD
J. Isku-habaynta isku xidhka waraaqda dhejiska
K. Bandhig qalad
L. Nidaamka is-saliimaynta
Run ahaantii xaqiiji hawlgalka digitization, macluumaadka, aragga.
Dheecaan weyn.rullaluistemadka ahama
Qudiyaha xawaaraha sare ee Servo, otomaatig u hagaaji
Gaadhiyaha hogaanka ee Servo, nuugid weyn
Gaadhi suunka Servo
Gaadhiyaha hogaanka ee Servo, nuugid weyn
Gaadhi suunka Servo
Bilaw hal taabasho ku xidh iskoorayaasha
Qaab-dhismeed laba-dhal leh, cimriga dheereeya
Cadaadiska otomaatiga ah & habka qadarka xabagta hagaajinta nidaamka
Nidaamka sifaynta otomaatiga ah
Faahfaahinta Laminator Flute
A. Nidaamka koontaroolka elektiroonigga ah ee garaadka oo buuxa
Xakamaynta dhaqdhaqaaqa Parker American oo leh kontoroolka tooska ah ee PLC, kontaroolaha fogaanta booska iyo matoorka servo waxay u oggolaanayaan shaqaalaha inuu dejiyo cabbirka xaashida shaashadda taabashada oo uu hagaajiyo xaashida sare iyo booska warqadda hoose si toos ah.Usha birta birta ee simbiriirixan ee la soo dejiyay ayaa ka dhigaysa meelaynta mid sax ah;Qaybta riixaya waxay kaloo leedahay kontaroolaha fogaanta ee FWD & kantaroolka inching BWD.Mashiinku wuxuu leeyahay shaqada kaydinta xusuusta si uu u xasuusto badeecad kasta oo aad kaydisay.HBZ-3 waxay gaartaa otomaatignimada runta ah oo leh shaqeyn buuxda, isticmaalka hooseeya, hawlgal sahlan iyo la qabsi xoog leh.
B. Qaybaha korantada
Mashiinka Shanhe wuxuu ku shaqeeyaa moodelka HBZ-3 ee heerka warshadaha mashiinka Yurub.Mashiinka oo dhami wuxuu isticmaalaa noocyo caalami ah oo caan ah, sida PARKER (USA), MAC (USA), P+F (GER), SIEMENS (GER), BECKER (GER), OMRON (JPN), YASKAWA (JPN), SCHNEIDER ( FRA), iwm. Waxay dammaanad qaadayaan xasilloonida iyo cimri dhererka hawlgalka mashiinka.Kontroolka isku dhafan ee PLC iyo barnaamijkeena is-abaabulay waxay garwaaqsadaan kontoroolka mechatronics si loo fududeeyo tillaabooyinka hawlgalka oo loo badbaadiyo qiimaha shaqada.
Mashiinku wuxuu qaataa kontoroolka dhaqdhaqaaqa (Parker, USA) si loo gaaro gudbinta calaamadaha tooska ah iyada oo aan la faragelin, xasilloon oo sax ah.
PLC (SIEMENS, Jarmalka) kontoroolka saxda ah, marka xaashida hoose aysan soo bixin ama quudiyaha uu soo diro xaashiyo laba jibaaran, mashiinka ugu weyn ayaa joogsan doona si loo yareeyo khasaaraha.In ka badan 30 sano oo waayo-aragnimo wax soo saarka mashiinka laminating ka dhigaysa nidaamka barnaamijka mid xasiloon iyo saxnaanta laminating waa sare.
Mashiinku wuxuu isticmaalaa qalabka wax lagu baaro (P + F, Germany), kaas oo aan lahayn wax shuruudo ah midabka xaashida sare iyo xaashida hoose.Madow sidoo kale waa la aqoonsan karaa.
C. Quudiye
Cilmi-baaris madax-bannaan iyo horumarinta alaabooyinka la aqoonsan yahay: Feeder.Naqshadeynta quudiyaha-dhamaadka sare ee daabacaha, waa aalad quudin warqad ah oo la xoojiyay oo leh nuugid warqad sax ah, quudin warqad siman.ugu badnaanXawaaraha quudinta warqadaha ee quudiyaha waa 20,000 pcs/saacaddii.
Kontoroolka tooska ah ee korantada.Feederku si toos ah ayuu meesha u iman doonaa ka dib marka cabbirka warqadda la geliyo shaashadda taabashada oo uu si fiican u hagaajiyo.Bamka weyn ee tuubbada nuugida ayaa si gaar ah loogu hagaajiyay warqadda foorarsan.
D. Dual-way of loading sheet top
Tusmada warqadda looxa oo dhan waxay noqon kartaa bu soo galay feedhiyaha warqada iyada oo aan la socon, taas oo ku haboon warqadda guddiga oo dhan ee alaabta waraaqaha waaweyn.
Warqadda waxaa loo habayn karaa si habsami lehdhinaca mishiinka, ka dibna ku riixaya warqadda jidka, taas oo ka dhigaysa mid sax ah oo nadiif ah.
Isku toosintu waxay leedahay shaqada "habaynta korantada oo toos ah".Waxay ku qalabaysan tahay nooca gantry-ga hore-u-loading, sxawliga iyo wakhtiga ayaa ka hadhay diyaarinta rarka warqadaha si loo hubiyo badbaadada shaqaalaha.Waxay gaadhaa shaqo hufnaan sare leh.
E. Qaybta gudbinta warqadda hoose (Ikhtiyaar)
v Nooca cidhifka rasaasta ( taayirada qorraxda waxaa wada matoorka servo oo leh hawo nuugid xooggan):
Waxaa gacanta ku haya servo gaar ah, iyo qulqulkeeda hawo-mareenka ah iyo qulqulka quudinta warqadaha ee kordhay ayaa aad ugu anfacaya gaarsiinta siman ee warqadda hoose, qallafsan, culus iyo cabbir weyn.Naqshadaynta tafaasiisha la hiigsanayo: Taayir kasta oo quudintu waxay ku qalabaysan tahay xadhkaha hal dhinac u socda si loo hubiyo bixinta saxda ah iyo quudinta deggan.Taagerada caagga ah ee warqadda quudinta waxay leedahay nolol adeeg oo dheer, taas oo gaari karta 5-10 sano, taas oo yareyneysa xoogga shaqada ee beddelka taayirrada caagga ah iyo kharashka iibka ka dib.Noocani wuxuu ku habboon yahay loox kasta oo jiingado ah, wuxuuna aad ugu habboon yahay laminating kartoonada lakabka badan.
Ikhtiyaar: Dhululubada saxda ah ayaa lagu dari karaa si loo salaaxo warqadda oo loo hubiyo in warqadda hoose ay nadiif tahay.
Kor u qaad mashiinka hagaajinta madaxbannaan, taas oo ah, warqadda hoose ayaa si toos ah udub dhexaad u noqon doonta, waxaana si madaxbannaan loo hagaajin karaa iyada oo loo marayo dhinaca saxda ah, taas oo ku habboon in lagu xalliyo dhibaatada in warqadda hoose aysan buuxin xeerarka.
Nooca gudbinta suunka (suunka feerka waxaa wata matoorka servo oo leh hawo nuugid xoogan):
Looxa jiingadaha ah waxaa si habsami leh ugu qaada suunka daloolsan, kaas oo si gaar ah ugu habboon dahaadhka u dhexeeya warqadaha daabacan ee midabka leh iyo looxa jiingadaha ah (F/G-flute), kartoonada iyo looxa cawl.Warqadda hoose lama xoqin doono marka la gudbinayo.
F. Meesha qaybta xaashida hoose (Ikhtiyaar)
v Nooca caadiga ah, dhererka boosku waa 2.2 mitir, taas oo ah badbaadin badan.
v Nooca la dheereeyey, dhererka boosku waa 3 mitir, kaas oo ku habboon rarista, dhejinta iyo hawlgalka warqadda hoose ee cabbirka weyn.
G. Habka wadista
Waxaan isticmaalnaa suumanka waqtiga ee dibadda laga keeno halkii silsiladda taayirrada dhaqameed si loo xalliyo dhibaatada laaminta aan saxda ahayn ee u dhaxaysa xaashida sare iyo xaashida hoose sababtoo ah silsiladda duugowday oo aan ku xakameyno qaladka dahaadhka gudaha ± 1.0mm, sidaas darteed buuxinta lakabka saxda ah.
Dhammaan dhinacyada bidix iyo midig ee qaybta lamination waxaa loo hagaajiyay qaab-dhismeedka labajibbaaran, kaas oo si wax ku ool ah u kordhin kara nolosha adeegga ee xajinta.Nidaamka sahayda saliida ee tooska ah, way fududahay in la ilaaliyo mishiinka, iyo xajinta ma fududa in la dhaawaco.
Qaab dhismeedka la xoojiyay: saxanka derbiga ee laminatorka biibiile ayaa dhumucdiisu tahay 35mm, mashiinka oo dhanna waa culus yahay si loo hubiyo xawaaraha sare iyo hawlgalka xasilloon.
H. Kordhi dhexroorka nidaamka daahan xabagta (Ikhtiyaar)
Kordhi dhexroorka rullaluistemadka daahan.Si loo hubiyo in xabagta si siman loo dahaadhay iyada oo aan la firdhin oo kala saarin inta lagu jiro orodka xawaaraha sare leh, SHANHE MACHINE waxay naqshadaysaa nidaamka dahaarka koollada kaas oo adeegsada rullaluistemadka qaabka birta ah.Qaabka gaarka ah ee rhombic-ga ayaa loogu talagalay koolada ku dahaaran warqadda, taas oo badbaadisa isticmaalka xabagta oo ay yarayso nuxurka biyaha ee alaabta la dahaadhay, aad bay ugu habboon tahay in la sameeyo xaashida xaashida.Qalabka xabagta ee gaarka ah ayaa si wax ku ool ah u xaliya qulqulka xabagta iyo dhibaatada duulista.Qalabka dib-u-warshadaynta xabagta ee tooska ah waxay ka fogaan kartaa inay dhumiyaan xabagta.Hubi in alaabtu ay adag tahay oo aanay lahayn wax soo jiidasho leh.
Faahfaahinta Istakarka Warqadaha Toosan
LFS-145/170/220 Vertical Paper Stacker waxa loogu talagalay in lagu xidho laydhka biibiile si loo xaqiijiyo shaqada xidhidhiyaha waraaqaha tooska ah.Waxay ku ururinaysaa alaabta lamination ee dhammaatay oo ay u ururinayso raso iyadoo loo eegayo tirada dejinta.Mashiinku wuxuu isku daraa shaqooyinka waraaqaha si isdaba joog ah u rogrogaya, ku dhejinta xaashida dhinaca hore ama dhinaca dambe iyo isugaynta nadiifka ah, iwm. Ilaa hadda, waxay ka caawisay shirkado badan oo daabacaadda iyo baakadaha si ay ula tacaalaan dhibaatada shaqaale yaraan, hagaajinta gobolka shaqada, badbaadin shaqo adag oo aad u kordhisa wadarta guud ee wax soo saarka.
LFS-145/170/220 Istakarka Warqadaha Toosan, oo leh hal-taabasho Bilaw ah, uma baahna hawlwadeen si uu u hagaajiyo.Qayb gudbinta ayaa lagu daraa si habsami leh u wareejinta.Kahor intaan warqadu tagin qaybta rogrogmi karta, warqad ayaa lagu sixi doonaa afarta dhinacba.Cutubka rogrogmada ayaa kombayuutarka ku dhejin kara hal-flip, laba-laabasho ama aan-rogid lahayn.Ka dib marka warqada lagu ururiyo meel tuunsan, mishiinku wuu garaaci doonaa gambaleelka oo ka soo riixayaa rasinka ka soo baxaysa shaadhka, ka dibna hawlwadeenku waxa uu isticmaali karaa jaakada palette si uu meesha uga saaro.
A. Kontroolka isku dhafan: xaashida kontoroolka fiilooyinka kontoroolka, bilaw hal taabasho ah
Geli cabbirka xaashida shaashadda taabashada ee laminatorka flute, iyo xirmooyinka warqadda isla markaaba waa lagu xidhi karaa.Sabuur kasta oo waraaq ah oo lagu dhejiyo iyo goob kasta oo ku taal waxay gaari kartaa meesheeda isku mar.Xirmada waraaqaha ayaa sidoo kale leh shaashad taabasho oo madax banaan, HMI, oo ay fududahay in la barto.SHANHE waxay doonaysaa inay ku darto hawlgalka dhijitaalka ah oo ay hagaajiso xakamaynta caqliga leh ee mashiinada qaangaarka ah, si ay u yarayso shuruudaha hawl wadeenada.
B. Qaybta gudbinta kala-guurka (Ikhtiyaar)
Qaybtani waxay leedahay nooc dhululubo ah iyo ikhtiyaaro nooca dhaqaaqi kara, iyo qayb gudbinta kala guurka ah ayaa lagu rakibay inta u dhaxaysa qaybta riixaya iyo xidhmada waraaqaha si loo gaadho kala saarid wax ku ool ah.Hawlwadeenku waxa uu ka qaadi karaa xaashida qashinka wakhtigan si loo kordhiyo tayada alaabta.Qaybtan sidoo kale waa laga saari karaa waxaana loo beddeli karaa ururinta gacanta.
C. Isbeddelka xawaaraha kontoroolka servo ee saddex-heer ah
Ka dib warqadda ka tag qaybta riixaya, sababtoo ah warqaddu waa is dulsaaran tahay, waa inay kala saartaa warqadda.Gaadhi-qaadiyaha oo dhan waxa loo nashqadeeyey dardargelinta saddex weji ee alaabta dhererka jiingada ee kala duwan.Qaybinta qumman.
Waxaad hagaajin kartaa dhererka xaashida rogrogmi karta (Max. 150mm) si aad u go'aamiso tirada dufan kasta, marka la gaadho tiradaas, warqad ayaa si toos ah loogu diri doonaa qaybta rogrogmada.
Waraaqda ayay xagga hore iyo labada dhinacba ka salaaxdaa si ay warqaddu si fiican u urursato.
Meeleyn sax ah oo ku salaysan tignoolajiyada soo noqnoqda ee doorsooma.Riixitaanka warqad aan adkaysi lahayn
D. xakamaynta Servo
Isticmaal beddelka soo noqnoqda si aad warqad ugu riixdo;unugga rogrogmada waxa ay isticmaalaan kontoroolka mootada servo.
E. Qaybta Taageerada
Meelaynta danbe, iyo warqado ka salaaxa 3 dhinac: dhinaca hore, dhinaca bidix iyo dhinaca midig.Hubi in la isku xidho dalabka.
Qalab horay loo raray oo loogu talagalay keenista aan joogsiga lahayn.Dhererka dhejiska warqadda waa la hagaajin karaa inta u dhaxaysa 1400mm ilaa 1750mm.
F. Qayb Bixinta (Ikhtiyaar ah)
Si toos ah u shaqaynta palette warqad kaabis.Marka looxa oo dhan si toos ah looga soo saaro rasinka, baallaha warqadda si toos ah ayaa loo kabi doonaa oo si toos ah kor loogu qaadayaa, mashiinku wuxuu sii wadaa inuu helo warqad.
Nidaamka saadka, si toos ah ayuu u kabi karaa suunka warqadda, soo riixi kara baallaha warqadda marka ay buuxsanto, oo isticmaal jaakada palette si aad u dhaqaajiso.Kahortagga keenista warqaddu inay xayiranto ama ay soo dhacdo tuulmo warqad ah.
Ilaalinta badbaadada: haddii hawl-wadeenadu ay gudaha u galaan mishiinka, mishiinku wuxuu lahaan doonaa digniinta cod ee Ingiriisi iyo xidhid toos ah.
Liiska falanqaynta hufnaanta shaqada G.Stacker:
| Alaabta Lamination | 1450*1450 laminate Q'ty | 1700*1650 laminate Q'ty | 2200*1650 laminate Q'ty |
| Hal E/F-flute | 9000-14800 pcs/saacadii | 7000-12000 pcs/saacadii | 8000-11000 pcs/saacadii |
| Hal B-flute | 8500-10000 pcs/saacadii | 7000-9000 pcs/saacadii | 7000-8000 pcs/saacadii |
| Double E-flute | 8500-10000 pcs/saacadii | 7000-9000 pcs/saacadii | 7000-8000 pcs/saacadii |
| 5-dabiici BE-flute | 7000-8000 pcs/saacadii | 6000-7500 pcs/saacadii | 5500-6500 pcs/saacadii |
| 5-dabiici BC-flute | 5500-6000 pcs/saacadii | 4000-5500 pcs/saacadii | 4000-4500 pcs/saacadii |
| Fiiro gaar ah: xawaaruhu wuxuu ku salaysan yahay sabuuradaha warqadaha dhumucdooda dhabta ah.Dhumucdiisuna waxay u dhaxaysaa 0 ilaa 150mm.Falanqayntan waxay ku salaysan tahay xisaabinta aragtida.Haddii looxyadu ay aad u kacsan yihiin, tirada warqadaha is dulsaaraya ayaa laga yaabaa inay ka yaraato. | |||
